The description field committed to the store only on textarea blur, so
saving via Ctrl+S (the primary shortcut, which never blurs the field)
dropped the edit. Make it controlled and commit on each change; snapshot
history once per edit session (on focus) so undo stays a single step.
ha-relevant: yes
Make Node Groups mutable instead of fixed-at-creation:
- removeFromGroup / addToGroup store actions (inverse pair, history-aware)
- right panel: per-member remove button + editable group description
(reuses data.notes, no backend/serializer change)
- drag a node over a group → confirm modal to add it (getIntersectingNodes)
Tests: +21 (store, panel, canvas detection, modal).
ha-relevant: yes
Connection labels now accept line breaks. The label field in EdgeModal
is a textarea (Enter inserts a newline) and the rendered edge label uses
whitespace-pre-line so newlines display as multiple lines.
Closes#183
ha-relevant: yes
Per-service checks now only probe HTTP(S)-reachable services. SSH (22) and
other non-web ports (DB, mail, DNS, raw TCP) stay 'unknown' (grey category
colour) rather than going red — an open TCP socket doesn't prove the service
is healthy, and a firewalled port flapped red misleadingly.
ha-relevant: yes
The status WebSocket pool removed connections with list.remove(), which
raises ValueError on a double-remove (broadcast already dropped a dead
socket, then disconnect tries again), and only released a slot on
WebSocketDisconnect — any other error leaked the socket into the
broadcast pool. Centralise removal in an idempotent _drop() called from
a finally block and from _broadcast.
ha-relevant: yes
Adds optional live status checking per service (not just per node),
requested as a follow-up to issue #196.
Backend:
- New check_service / check_services: HTTP(S) GET for web services, TCP
connect otherwise; UDP and port-less non-web services stay 'unknown'.
- New scheduler job 'service_checks', independent interval (default 300s),
added/removed live via set_service_checks_enabled.
- Settings gain service_check_enabled + service_check_interval (>=30s),
persisted to scan_config.json. New WS message type 'service_status'.
Frontend:
- Live per-service status overlay in canvasStore (not persisted, so it
never round-trips through canvas save), fed by the WS message.
- DetailPanel + canvas node service rows: offline service turns red
(#f85149), otherwise keeps its category colour.
- SettingsModal: toggle + interval input (default 300s / 5 min).
Off by default — no behaviour change until enabled.
ha-relevant: yes
Addresses three reports from issue #196:
- Ping now sends 2 probes with a ~2s timeout (was 1 probe / 1s) so a
single dropped packet or a slow IoT/ESPHome device no longer flaps a
node offline (#196.1, #196.2).
- IPv6-only devices (e.g. Alexa) are now pinged over IPv6: ping6 on
macOS, -6 flag on Linux/Windows, detected via inet_pton (#196.3).
- Manually-added services carry no category and so always rendered grey
even when they were reachable HTTP/HTTPS. A resolvable web URL now
falls back to the web colour (#196.9).
ha-relevant: yes
The Show Port Numbers toggle reset on every reload because the backend
never stored it: the column was missing from the Node model and the field
was stripped by NodeSave/NodeBase/NodeUpdate schemas, so canvas/save
silently dropped it.
Add the show_port_numbers column (idempotent migration), and the field to
the node schemas so it round-trips through save/load.
Add regression tests covering persistence and the default-false case.
Fixes#184
ha-relevant: yes
The Toolbar and Sidebar Save buttons wired onClick={onSave} directly, so
React passed the MouseEvent as the first argument. handleSave treats its
first arg as a designIdOverride, corrupting design_id and making the save
fail silently. Ctrl+S worked because it calls handleSave() with no args.
Wrap both handlers as onClick={() => onSave()} so no event leaks through.
Add regression tests asserting onSave is called with zero arguments.
Fixes#186
ha-relevant: no
Hide-IP was a sidebar button held only in memory, so it reset on reload.
Moved it into the Settings modal Canvas section and persist it to
localStorage (new ipDisplay util); the canvas store now seeds hideIp from
storage and writes through on toggleHideIp/setHideIp. Settings is now also
reachable in standalone (no-backend) builds, with the backend-only status
interval guarded so the modal still works there.
ha-relevant: yes
Clipboard now holds nodes + internal edges and survives design switches
(loadCanvas no longer clears it), so a selection copied in one design can
be pasted into another. Copy pulls in children of selected groups/
containers; paste remaps node/edge/parent IDs and lands the bounding-box
center under the cursor (or viewport center). Shortcut handling moved into
CanvasContainer for flow-coordinate projection.
ha-relevant: yes
Clicking Settings now opens a dialog with the status-check interval and
canvas snap options plus Save/Cancel, replacing the inline left-panel view.
Removes the 'settings' Sidebar view and SettingsPanel component.
ha-relevant: maybe
Snake and flow edge animations used SVG SMIL <animate repeatCount="indefinite">.
SMIL keeps running while a tab is hidden (CSS animations pause) and grows memory
in Chrome over long-lived background tabs. Convert both to CSS @keyframes
(homelable-snake / homelable-flow), matching the existing basic-dash pattern.
Identical visuals and timings; bidirectional snake yo-yos via `alternate`.
Adds a regression test asserting animated edges emit zero <animate> nodes and a
CSS animation instead.
ha-relevant: yes
Add an authenticated GET /api/v1/liveview/config endpoint exposing the
configured LIVEVIEW_KEY to logged-in admins, so the UI builds a
ready-to-use share link. The header View button opens
/view?key=...&design=<activeDesignId>; LiveView forwards ?design=<id>
to the public endpoint, which renders that design's canvas.
ha-relevant: maybe
View-only mode set no minZoom, so React Flow defaulted to 0.5 and big
canvases couldn't zoom out far enough to fit. Match the editor's bounds
(minZoom 0.25, maxZoom 2.5). Add a regression test asserting the props.
ha-relevant: maybe
Address review nits on the close/Enter fix:
- Add statusFilter to the keydown effect deps so Enter dispatches the
correct bulk action regardless of whether the device list changes
- Drop redundant title="Close" on the X (aria-label is enough)
ha-relevant: maybe
In the Hidden view the only bulk action is Restore, but the Enter
shortcut in select mode always called handleBulkApprove — approving
hidden devices. Dispatch on statusFilter: restore when hidden, approve
when pending. Add regression tests for both views.
ha-relevant: maybe
The close X used a raw <button onClick={onClose}>, bypassing Base UI's
dismissal. Outside-click worked (it goes through onOpenChange) but the
synthetic click on the X was dropped on Firefox/Windows. Route the X
through Base UI's DialogClose, the same path as outside-click and the
library's default close button. Add a regression test.
ha-relevant: maybe
Builds a real pre-designs database (nodes/edges without design_id, integer
canvas_state PK) and asserts init_db() adopts everything into a single
default Network Topology design with the viewport preserved, and that the
migration is idempotent across reboots. The rest of the suite uses create_all
and never exercised this in-place upgrade path.
ha-relevant: yes
Make designs (canvases) fully user-manageable: create with a chosen name
and icon, rename, change icon, and delete. Replaces the hardcoded
"New Electrical Design" button with a generic "New Canvas" flow.
- Add Design.icon column + migration that backfills legacy rows
(electrical -> zap, others -> dashboard)
- DesignModal: name input + curated lucide icon picker (create + edit)
- Sidebar switcher gains per-canvas edit/delete; delete guards the last
canvas and confirms
- designStore: addDesign/updateDesign/removeDesign with active reassignment
- Fix data loss on design switch: abort load when the save fails and keep
unsaved edits; skip the save-old step when the previous canvas was deleted
- designsApi create/update carry icon; design_type kept for back-compat
Tests: backend design CRUD (icon + cascade + last-canvas guard), designStore
actions, designIcons resolver, DesignModal create/edit/validation.
ha-relevant: yes
The MCP create_node/update_node inputSchema only advertised
type/label/ip/hostname/status (plus parent_id on update), so LLM
clients could not set documentation/hardware fields the backend
already validates and stores.
Mirror NodeBase/NodeUpdate by spreading a shared _NODE_FIELDS schema
into both tools: os, notes, mac, check_method, check_target, services,
cpu_count, cpu_model, ram_gb, disk_gb, show_hardware, container_mode,
custom_icon, properties. type stays an enum of canonical node types.
_dispatch already forwarded args verbatim, so no dispatch change.
Also extend _slim_canvas NODE_KEEP so get_canvas round-trips the new
documentation fields the LLM can now write.
Refactor tool definitions into a module-level TOOLS list for direct
schema assertions in tests.
ha-relevant: no
The backend stored the MAC, but the frontend built the approved canvas
node locally with properties=[] (non-zigbee) and no mac field. On save,
canvas/save upserts every node field from the in-memory canvas, so the
empty properties overwrote the DB MAC — the address showed after a
no-save reload but vanished once saved.
Now both approve paths (single + bulk) attach a MAC property row and
the mac field to the node added to the canvas, mirroring the backend
build_mac_property. Hidden by default, toggleable from the right panel.
- new buildMacProperty util + unit tests
- bulk-approve modal test asserts MAC propagation (IP device) and
absence for a zigbee device
ha-relevant: yes
The network scan captures each device's MAC, but approving a pending
device dropped it: the new Node had mac=NULL and no MAC in its
properties pane. Now both approve paths (single + bulk) copy the
pending device's MAC to Node.mac and add a MAC row to the node
properties so it shows in the standard properties pane with toggleable
visibility (hidden by default, consistent with zigbee props).
- build_mac_property: MAC NodeProperty row (hidden by default)
- merge_mac_property: append MAC to user-supplied props, idempotent,
preserves existing visibility
- single approve prefers the pending device MAC, falls back to payload
Adds unit tests for the helpers and API tests for both approve paths.
ha-relevant: yes
Pouzor