Replace the inline sidebar 'history' view with a dedicated ScanHistoryModal.
Same data and actions (refresh, auto-refresh while running, stop scan,
transition toasts) plus run duration, finished timestamp, and kind/status
filters. Scan/Zigbee start now surface a toast instead of force-switching
the sidebar view.
ha-relevant: yes
The description field committed to the store only on textarea blur, so
saving via Ctrl+S (the primary shortcut, which never blurs the field)
dropped the edit. Make it controlled and commit on each change; snapshot
history once per edit session (on focus) so undo stays a single step.
ha-relevant: yes
Make Node Groups mutable instead of fixed-at-creation:
- removeFromGroup / addToGroup store actions (inverse pair, history-aware)
- right panel: per-member remove button + editable group description
(reuses data.notes, no backend/serializer change)
- drag a node over a group → confirm modal to add it (getIntersectingNodes)
Tests: +21 (store, panel, canvas detection, modal).
ha-relevant: yes
Adds optional live status checking per service (not just per node),
requested as a follow-up to issue #196.
Backend:
- New check_service / check_services: HTTP(S) GET for web services, TCP
connect otherwise; UDP and port-less non-web services stay 'unknown'.
- New scheduler job 'service_checks', independent interval (default 300s),
added/removed live via set_service_checks_enabled.
- Settings gain service_check_enabled + service_check_interval (>=30s),
persisted to scan_config.json. New WS message type 'service_status'.
Frontend:
- Live per-service status overlay in canvasStore (not persisted, so it
never round-trips through canvas save), fed by the WS message.
- DetailPanel + canvas node service rows: offline service turns red
(#f85149), otherwise keeps its category colour.
- SettingsModal: toggle + interval input (default 300s / 5 min).
Off by default — no behaviour change until enabled.
ha-relevant: yes
Addresses three reports from issue #196:
- Ping now sends 2 probes with a ~2s timeout (was 1 probe / 1s) so a
single dropped packet or a slow IoT/ESPHome device no longer flaps a
node offline (#196.1, #196.2).
- IPv6-only devices (e.g. Alexa) are now pinged over IPv6: ping6 on
macOS, -6 flag on Linux/Windows, detected via inet_pton (#196.3).
- Manually-added services carry no category and so always rendered grey
even when they were reachable HTTP/HTTPS. A resolvable web URL now
falls back to the web colour (#196.9).
ha-relevant: yes
The Toolbar and Sidebar Save buttons wired onClick={onSave} directly, so
React passed the MouseEvent as the first argument. handleSave treats its
first arg as a designIdOverride, corrupting design_id and making the save
fail silently. Ctrl+S worked because it calls handleSave() with no args.
Wrap both handlers as onClick={() => onSave()} so no event leaks through.
Add regression tests asserting onSave is called with zero arguments.
Fixes#186
ha-relevant: no
Hide-IP was a sidebar button held only in memory, so it reset on reload.
Moved it into the Settings modal Canvas section and persist it to
localStorage (new ipDisplay util); the canvas store now seeds hideIp from
storage and writes through on toggleHideIp/setHideIp. Settings is now also
reachable in standalone (no-backend) builds, with the backend-only status
interval guarded so the modal still works there.
ha-relevant: yes
Clicking Settings now opens a dialog with the status-check interval and
canvas snap options plus Save/Cancel, replacing the inline left-panel view.
Removes the 'settings' Sidebar view and SettingsPanel component.
ha-relevant: maybe
Add an authenticated GET /api/v1/liveview/config endpoint exposing the
configured LIVEVIEW_KEY to logged-in admins, so the UI builds a
ready-to-use share link. The header View button opens
/view?key=...&design=<activeDesignId>; LiveView forwards ?design=<id>
to the public endpoint, which renders that design's canvas.
ha-relevant: maybe
Make designs (canvases) fully user-manageable: create with a chosen name
and icon, rename, change icon, and delete. Replaces the hardcoded
"New Electrical Design" button with a generic "New Canvas" flow.
- Add Design.icon column + migration that backfills legacy rows
(electrical -> zap, others -> dashboard)
- DesignModal: name input + curated lucide icon picker (create + edit)
- Sidebar switcher gains per-canvas edit/delete; delete guards the last
canvas and confirms
- designStore: addDesign/updateDesign/removeDesign with active reassignment
- Fix data loss on design switch: abort load when the save fails and keep
unsaved edits; skip the save-old step when the previous canvas was deleted
- designsApi create/update carry icon; design_type kept for back-compat
Tests: backend design CRUD (icon + cascade + last-canvas guard), designStore
actions, designIcons resolver, DesignModal create/edit/validation.
ha-relevant: yes
Extend splitIps to accept comma/semicolon/newline delimiters with dedupe,
and reuse it in DetailPanel for both the IP list and the service-URL host.
Fixes ServiceBadge links pointing at concatenated string when IPs were
entered with ';' or newline separators. Adds tests for new delimiters.
Draw.io / Figma style: while dragging a node, show dashed cyan guide
lines when its edges (left / center / right / top / middle / bottom)
align with another node's, and snap the position to the matched line
within a configurable threshold.
- utils/alignment.ts: pure snap math, returns delta + guide segments.
Same-size boxes show all aligned guides simultaneously.
- canvas/AlignmentGuides.tsx: SVG overlay locked to the React Flow
viewport (panned/zoomed correctly).
- hooks/useAlignmentGuides.ts: wires onNodeDrag/onNodeDragStop, applies
snap via setNodes, listens for Alt to temporarily disable.
- utils/alignmentSettings.ts: localStorage-backed prefs (enabled,
threshold 2-16px) with a tiny CustomEvent pub-sub so the SettingsPanel
and the drag hook stay in sync without a global store.
- Sidebar settings panel: toggle + threshold slider.
Multi-selection drag uses the union bounding box. Children with
parentId are skipped for v1 to avoid mixing absolute and parent-relative
coordinates. Hold Alt to escape snap.
Backend sends ISO timestamps with +00:00 offset. Code blindly appended
'Z' when the string didn't end with 'Z', producing '...+00:00Z' which
parses to Invalid Date.
Detect any timezone marker (Z, z, or numeric offset like +00:00) and
only append 'Z' for naive datetimes.
Co-authored-by:
Mirrors IP scan flow: POST /zigbee/import-pending now creates a
ScanRun(kind=zigbee, status=running) and returns immediately.
Networkmap fetch + pending upsert run in the background, status
transitions to done/error when finished.
Frontend: import modal closes on submit, scan history shows the
run with a ZIG/IP kind chip and toasts on completion. Pending
modal auto-refreshes when run finishes.
scan_runs.kind column added (default 'ip', idempotent migration).
Existing zigbee tests refactored to exercise _persist_pending_import
directly (background tasks don't see the test session); route test
verifies the run is created with kind=zigbee.
Replaces sidebar pending/hidden panels with a wide modal showing
devices as cards. Adds search, segmented source/status filters,
type filter, select mode for bulk approve/hide/restore, and
keyboard shortcuts. Hidden cards click-to-restore (no approval
detour); approval no longer pops the edit modal.
Backend: new restore + bulk-restore endpoints (hidden -> pending).
Coordinator auto-approves to a canvas Node; routers/end devices land in
pending_devices keyed by IEEE. Discovered parent->child edges are stored
in pending_device_links so that approving a pending device later
auto-creates the Edge once both endpoints exist as canvas Nodes.
- new POST /api/v1/zigbee/import-pending (default mode in modal)
- new pending_device_links table; ieee_address on nodes + pending_devices
- pending_devices.ip migrated to nullable (table rebuild on existing DBs)
- approve / bulk-approve return auto-created edges; sidebar pushes them
into the canvas store with bottom -> top-t handles
- ZigbeeImportModal: radio toggle pending vs canvas; reset on close
- PendingDeviceModal: zigbee badge, IEEE/LQI/vendor/model rows, services
hidden for zigbee
- Sidebar pending row: ZIG source badge, LQI badge, friendly_name fallback
- SearchBar: null-safe IP, also searches friendly_name and ieee_address
- Tooltip trigger uses asChild to avoid nested-button hydration error
forceView prop was overriding local activeView on every render. Once parent
set sidebarForceView='history' after starting a scan, it never cleared, so
clicks on other nav items were ignored. Treat forceView as a one-shot
trigger via the previous-prop pattern; user clicks afterward control view.
- Backend: POST /scan/pending/bulk-approve and /scan/pending/bulk-hide endpoints (registered before dynamic routes to avoid conflict); bulk-approve response includes device_ids for frontend mapping
- Frontend: PendingDevicesPanel gains per-row checkboxes, select-all, and a bulk action bar (Approve N / Hide N) that appears when ≥1 device is selected
- Tests: 6 new backend API tests + 7 new frontend UI tests for bulk selection flows
Follow-up to #78:
- Use primaryIp() so href targets the first IP when data.ip is comma-separated (e.g. "192.168.1.1, 2001:db8::1")
- Add primaryIp() helper to maskIp.ts
- Add 4 tests covering single IP link, absent IP, multi-IP href, multi-IP display text
- Display IP as a clickable link that opens http://<ip> in a new tab
- Match the existing Hostname link styling and behavior
- Add external link icon to indicate it's clickable
Pouzor